Access floor

AIR CONDITIONING PANELS

FOR CLIMATE CONTROL FOR ROOMS AND MACHINES.

The principle of air passing through access floors lends itself to the increasingly high room climate requirements in computer centres and office buildings etc. This airing principle utilises the natural behaviour of heated air. The air that is to be dissipated is extracted by suction using the shortest possible distance to the ceiling. Even with large amounts of air, draughts are thus avoided.

airconditioningpanels

 

 

 

 

 

PREUZMITE BROŠURU

CLEANROOMS

TYPE 3 CLEAN (STEEL) AND TYPE 7 ALUMINIUM

cleanrooms

The manufacturing of components and chips of the micro electronic, the production in optical and precision mechanics industry as well as in pharmacy and bio-technology, are carried out under conditions for clean rooms. The access floor MERO type 3 clean and type 7 aluminium was developed especially for the requirements of clean room technology.

 

 

 

 

For this special use it offers:
• air conditioning use: access floor as trailing floor
• installation of all lines of the process units under the access floor
• reduction of vibrations on dynamic stress

So the access floor MERO type 3 clean and type 7 aluminium can be seen as optimum solution for all uses for clean rooms.

PREUZMITE BROŠURU
PREUZMITE TEHNIČKE PODATKE

COMPUTER CENTRES AND MANUFACTURING AREAS

MERO TYPE 3 STEEL

type3

The MERO type 3 is due to its tensile strength the solution for production plants, cleanrooms, computer rooms or laboratories etc. where extremely high load bearing capacities and security against fracture are required.

 

 

 MERO TYPE 2

type2

The access floor construction type 2 has been designed in cooperation with electrical engineers and power station specialists. The construction has proved its worth in high, medium and low tension switchgears, battery rooms, control centres, emergency plants and is used in case of complicated bridging constructions as well as platform for fork-lift traffic.

 

FLOOR HEATING & COOLING

floorheatingandcooling

MERO-TSK floor systems have proved its worth for the installation of service lines for many years. From now on MERO access and hollow floor can be combined with MERO floor heating and cooling.
Hereby, the advantages of a floor heating/cooling with those of a MERO floor system are combined.
Floor areas such as large bank lobbies, foyers and production plants can now be provided with floor heating/cooling in critical areas too. The floor types 4/anhydrite and 6/calcium sulphate have proved as high thermal conductors respectively as storage for heat and cold.

PREUZMITE BROŠURU
PREUZMITE TEHNIČKE PODATKE

HEAVY DUTY AREAS

heavydutyareas

Raised Access Floors by MERO-TSK are used more and more in manufacturing halls. Since there is usually a high demand for HVACR in-house installations, building heights of 1.000 to 2.000 mm are not unusual.
In the past few years, MERO-TSK has proven in many building projects that even top-loads that occur for examples when forklifts and lifts are used can be accommodated without a problem.

Other classic applications:
– Printers´ shops
– Libraries
– Engine and vehicle test stands
– Public areas with vehicle and passenger traffic (e.g. airports, shopping centres, check-in areas etc.)

 

 

LOW-HEIGHT-ACCESS FLOOR

MERO-TSK REFURBISHMENT OF BUILDINGS/LOW-HEIGHT-ACCESS FLOOR

lowheightaccessfloor

The usual low access floor systems on the market are suitable for minimum construction heights allowing a maximum space utilisation. However,  they have the disadvantage that the subfloor area must be exactly levelled. Furthermore, the installation of electrical supply and waste lines is difficult due to the narrow pedestal module.

 

 

– floor heights from 40 mm finished floor height are possible
– cover panels approx. 15 mm
– no levelling of the subfloor necessary, levelling is done by the pedestals
– module of 600 x 600 mm enables installation of electrical supply and waste lines without any problem

We also set a new standard regarding load bearing capacity. 2000 N concentrated load required for office areas according to the European access floor standard are no problem. Test reports are in preparation.
This floor type also has better sound and fire protection values than other systems.

PREUZMITE BROŠURU
PREUZMITE TEHNIČKE PODATKE

OFFICES AND ADMINISTRATIVE BUILDINGS

In order to make a pre-selection of possible MERO systems, a decision has to be made upfront between floors that contain non-combustible materials only (Building Material Classification A) and such floors that may contain combustible components (Building Material Classification B).

BUILDING MATERIAL CLASS A – MERO ACCESS FLOOR TYPE 6

type6

MERO´s Type 6 flooring consists of fibre-reinforced mineral fibre panels and a high walk comfort with a very good sound absorption and it is thus an ideal access floor for first-class flooring systems in office buildings. This floor type achieves extraordinarily high results in fire resistance tests.

 

 

BUILDING MATERIAL CLASS B – MERO ACCESS FLOOR TYPE 5

type5

MERO´s Type 5 flooring has proven its suitablility in office settings for several decades. Wherever there are no increased fire protection requirements, it constitutes an ideal cost-efficient solution.